GLOBAL GREEN POWER

                                                                                                                  3225 Oberlin Lubbock, TX 79415             
                                                 

FEATURES

     These power plants are being developed to provide economical, renewable power and to eliminate waste disposal problems -- while being environmentally friendly.
     The power plants are engineered to meet local, state, and national environmental standards while simultaneously  providing a virtually cost-free solution to disposal of biomass waste streams.

The technology.. what it is
    These power plants are not traditional boiler andsteam turbine units. These power systems are based on integrating a  gasifier with a gas turbine. This technology includes gasification of biomass to produce a clean gas used to fuel a gas turbine engine coupled to an electrical generator.

     The biomass power plant is smaller in size and has a higher fuel to electrical power efficiency than conventional steam power plants of the same generating capacity. These biomass power plants are being designed to economically use fuel resources such as straws, grasses, nut shells, cotton gin trash, stalks and other plant growth material less suitable or not considered for use in traditional power plants.

Cratech has been developing new technology since 1990
         We are  working with our clients to give them the ability to use, or to more effectively use, renewable biomass resources to fuel power plants.

Affordable advanced biomass power plants  commercially available

     Global Green Power is demonstrating and placing into commercial operation the first in a family of advanced biomass fueled cogeneration power plants which are well within the price constraints of small companies, energy producers, and communities that can benefit from this advanced technology.

     These cogeneration power plants range in unit sizes from 4 MWe to 20 MWe of electrical output, and are designed to be fueled with biomass such as:

 

General performance summary of three sizes of  Biomass power plants

Size                                                                  1M            5M         10M

Biomass                            tons/hr               1.10         4.25         8.00

Net electrical                         KWe             1,052       5,069       9,632

Steam outputs(150psi)     lbs/hr             6,500     20,000     45,000

 
Performance cited is based on the following fuel characteristics:

The biomass fuel is wood waste received from a hammermill and graded through a 2'' * 2'' grate, cleaned to contain a minimum of inorganics (glass, metal, rocks, dirt, nails, etc). The wood is 15% moisture on a wet basis. It has the following ultimate analysis:

C 52.3%,H 6.3%,O 40.5%, N 0.1% , S<0.1%, ash 1%.

Cal heat value is 7630 btu/lb (d.w.)

       

    These power plants can provide economical  co-generated power for mills, manufacturing and processing plants, such as: